Briwax Toluene Free - Briwax responds to user concerns! When Henry Flack developed his wax in 1860, before environmental concerns were an issue, he used toluene in the formula to ensure the finest finish. In the 1990’s regulatory agencies throughout the USA started to highlight certain groups of chemicals and the extra care needed when using them. Toluene is a member of these groups, so a toluene-free formula has been developed, using the identical beeswax/carnauba wax blend. The solvent in Briwax Toluene Free is Mineral Spirits. Available in Clear and 6 Wood Finishes

DIRECTIONS: Apply a thin layer of wax with a cloth or 0000 steel wool. Allow it to dry one minute and burnish with a soft cloth or brush. A second coat of Briwax increases durability and gloss.

Coverage: 30-50 sq/ft per 1 pound can

Drying Time: 1 minute (Touch); 15 minutes (Recoat)